Draiveru meklēšana pēc ID vai ierīces nosaukumu

Pazīstams ierīces:165022367

Pēdējais pazīstams draiveris: 23.12.2020

Ad

The Switchover to Nvidia GeForce GTX 760

Nvidia has officially introduced one more graphics adapter from 700 series: GeForce GTX 760. As it was expected earlier, the card is based on GK104 graphics chip (on Kepler architecture) with 1152 CUDA cores, 32 ROPs and 96 TMUs. Its nominal clock frequency makes up 980 MHz, still this index might be overclocked at average to 1033 MHz.



Reference adapter is furnished with 2 GB of GDDR5 memory that employs 256-bit interface. Nonetheless, Nvidia does not exclude the possibility of introducing the models with 4 GB memory capacity. The nominal memory clock frequency equals to 1502 MHz, while its overclocked frequency reaches up 6008 MHz. This adapter is thought to support GPU Boost 2.0 technology that adjusts the overclocking frequency in reliance on GPU thermal condition. Thus, the more powerful cooling system is, the higher frequencies the users might expect.


To continue, power supply subsystem is represented by a couple of 6-contact power sockets. The maximal claimed TDP …

Buffalo Showcases Four-Section NAS TeraStation 4400

Buffalo Technology, an American-based manufacturer of high-end network solutions, continues introducing its newest elaborations to the customers all over the world. This time the company showcases a new four-section NAS, codenamed TeraStation 4400. According to the developers, the product is targeting those users who would like to receive flexibility in shaping their systems and scale up the storage volume individually.



The heart of the storage is dual-core Intel Atom D2550 processor. In regards to memory, it is represented by DDR3 modules with an overall capacity of 2 GB. TeraStation 4400 accommodates a pair of gigabit Ethernet ports, two USB 2 and two USB 3.0 ports, onboard DLNA media-server, onboard Bit Torrent client, and built-in Buffalo WebAccess for a remote access to data from other devices. Additionally, the item is able to operate as NAS and as iSCSI.


As vivid from the framework, the new entry allows for the installation of up to four drives with SATA III …

Toshiba Introduces OCZ VT180 & TR150 2.5-Inch SSDs

As part of the Computex 2016, Toshiba introduced a couple of OCZ-branded 2.5-inch SATA solid-state drives. The OCZ VT180 & the OCZ TR150 are available in four capacities: 120 GB, 240 GB, 480 GB & 960 GB. The key differentiation between the two models lies in the choice of memory type; the first SSD employs MLC NAND chips, whereas the second item uses TLC NAND chips. The pair also differs by warranty liabilities, offering 5- and 3-year’s limited packages correspondingly.



Toshiba OCZ VT180 employs SATA III interface, featuring 100.45x69.75x7 mm dimensions. Its sequential Read/Write data transfer speed makes up 550/440 MBs across the line. At the same time, random Read/Write specs vary from 85.000-95.000 IOPS/90.000 IOPS respectively. The drive consumes 3.7 W power in active mode, reducing this level to 0.89 W in standby mode.


This model is estimated for 1.500.000 hours of fool-proof operation. Moreover, it supports such advanced technologies as SMART, TRIM and Idle Time …

USB host controllers OWC, modeļu sarakstu

Izvēlieties modeli, savu USB host controllers no uzņēmuma OWC no saraksta 54321 modeļus, kas redzami šajā lapā. Mūsu datu bāzē ir vairāk 654963 draiveri, kurus jūs varat lejupielādēt pilnīgi bez maksas.

USBkontrolieris – neredzams acis aparāta sastāvdaļa, kas ļauj bez grūtībām savienot ar DATORU, zibatmiņas, smart phones, e-grāmatas, kameras un citas ārējās ierīces. Parasti iestatījums darba kontrolieris notiek vienlaicīgi ar rezervēšanu darba mātesplates, pateicoties paketi programmas instalācijas diskā.

Tomēr, ņemot vērā nepārtrauktu papildināšanu "perifērijas bagāžas", lietotājam var rasties nepieciešamība palielināt portu skaits platjoslas savienojumu. Ar šo mērķi vajadzētu iegādāties papildus pārvaldnieks regulators (standarts 2.0 vai vairāk mūsdienu 3.0) un lejupielādēt draiveri, lai kontrolieri USB.

Kā noteikt kontrolieris un zināšanas, kas viņam ir draiveri?

  1. Mehāniskā daļa

Lai uzstādītu kontrolieris ir pirmā lieta, kas jums nepieciešams noņemt sānu vāku iepriekš izslēgta no sistēmas bloka. Uz mātesplates – patiešām izcilu sadaļā aparatūras daļas – atrodiet apgabalu ar PCIslots; vienā no bezmaksas slots ievietojiet kontrolieris. Šajā gadījumā, pārliecinieties, ka panelis ar savienotājiem ērti, "lauku" speciāli atvēlētā caurums pie aizmugurējās sienas korpusa. Pēc tam var likt uz vietu, sānu vāku.

  1. Darba iestatīšana

Lai SISTĒMA sāktu atpazīt plug USBierīce un jāinstalē draiveri, lai kontrolieri USB. Tiklīdz SISTĒMA tiek ielādēta, meistars meklētu jaunas ierīces, noteiks tikai tad, kas saistītas iekārtas. Ja vajadzīgie draiveri nav konstatēts sistēmu, tos bez pūlēm var lejupielādēt no Interneta (ja kopā ar ierīci komplektā nav iet instalācijas disku).

Kad esat ievadījis visus nepieciešamos draiverus var droši savienot saderīgas perifēriju un baudīt augstu datu pārraides ātrumu.

Populārākās kategorijas vadītāja USB host controllers OWC