Förare av ID eller namn på enheten

kanda enheter:165022367

Den sista kända förare: 23.12.2020

Ad

Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Evga Debuts with a First-Rate ACX CPU Cooler

Evga, a company primarily known for high-end graphics solutions, decided to expand its production line by entering cooling market. Herein, it elaborated a first-rate CPU cooler, entitled ACX (codename: 100-FS-C201-KR). The new-comer features 164x134.5x91.5 mm dimensions and weighs 1065 g. Luckily, it can be already found in free sale for a price of $50.



The ACX is a tower-like air cooler that is able to efficiently remove heat from all processors that are compatible with the following sockets: Intel LGA 2011/1156/1155/1366/1150/775 and AMD FM1/FM2/AM3/AM3+/AM2/AM2+.


Evga ACX consists of an aluminum heatsink, five copper heatpipes that support Direct Touch technology, and one PWM fan of 120 mm dimensional type. The heatsink is composed of multiple thin plates, which differentiate themselves by an unusual framework. Such framework enables the emergence of two airflows around the heatpipes. According to Evga, this promotes for a better heat removal process.


The …

Spire Debuts with Gaming PC Chassis X2.6019

Spire Corporation put itself on record with a new gaming PC chassis, codenamed X2.6019. The new-comer is developed in mid-tower form-factor, featuring 520x215x508 mm dimensions, and is made of 0.6 mm cold-rolled galvanized steel (SECC). Despite medium dimensions, it might easily accommodate motherboards of miniITX, microATX and ATX standard. According to Spire, this model belongs to MOD solutions, since it ensures an easy access to the hardware components during modification or update of the system.



Spire X2.6019 houses four external bays for 5.25-inch drives, six internal bays for 3.5-inch drives, as well as seven slots for PCI expansion cards. Its internal layout is divided by linear plates into three sections; such framework promotes for a better heat removal. It should be mentioned that this chassis is able to lodge nearly any CPU cooler and any high-end graphics card. Moreover, drive mounting can be realized without any dedicated tools.


To continue, this PC chassis …

"hp deskjet d1360", listan över drivrutiner

Här kan du ladda ner drivrutiner för "hp deskjet d1360". Använd länkarna på sidan för att välja en lämplig drivrutin, klicka på den för att ladda ner. Även du kan hitta en drivrutin för denna enhet med hjälp av den söka av ID och namn.

DevID : : USB devices : : Hewlett Packard : : "hp deskjet d1360"