LEPA introduced three new power supplies — B650-SA, B700-MAS and the B800-MAS, which will replace older models B750-MA, and B850-MA. Newcomers have been certified with 80 Plus Bronze (efficiency of 88% of the networks 230V), and met the standards of ATX12V v2.3 and EPS12V 2.92, and positioned as solutions for gamers and owners of GPU configurations SLI and CrossFire, workstations and small servers.



New items are equipped with inverter DC-DC (to improve stability), have the topology of Double Forward Circuit, as well as high-quality electrical components: solid capacitors and heat resistant (105 ° C) capacitors made in Japan.


Active cooling LEPA B700-MAS/B800-MAS is provided by 140-mm fan on double bearings. The model B650-SA has a fan size of 120 mm. The intensity depends on the rates of temperature sensor. Power Cables PCI-E, SATA and Molex flat are detachable. The main ATX 24-pin, as well as “CPU” EPS12V 8-pin are collected in a nylon sheath. LEPA B650-SA has …

Swiss manufacturer of cooling systems, Arctic Cooling, has recently released a new cooler developed specifically for graphic adapters from AMD. Earlier this year the company launched the cooling system which is compatible with graphic adapters from Nvidia developers. The new product, codenamed Accelero Hybrid 7970, distinguishes from its predecessor also by the foot of water block which is upgraded to be compatible with AMD HD 7900 series.



Cooling system Accelero Hybrid 7970 consists of two parts which boast as air, so water cooling standards. It is able to manage up to 320W of hot air. The water block is cooled down by the 120 mm fan which is able to achieve the speed in the measures of 400-1350 rpm. The block, that is installed on the board, is equipped with 80 mm fan and is able to achieve from 900 to 2000 rpm speed. The noise level is dwindled down to the minimal index.


Arctic representatives claim that their new water block is 200% more efficient than the nominal …

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.



The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …