All those people who look for a small-sized and classic chassis for HTPC system have got a wonderful opportunity to implement their longing into life. PC-Cooling GmbH has introduced its new PC case, codenamed Coolcube, under Cooltek brand. Such an engaging name totally corresponds to the case's framework: cubic case made of anodized aluminum and painted black. Featuring 210x200x240 mm dimensions, the product is estimated for the installation of mini-ITX motherboards. The case itself contains a large number of ventilation holes in the side and rear parts.



The number of PCI expansion slots equals to two, but there is no a dedicated bay for 5.25-inch drives. However, there is room for the installation of a single 3.5-inch drive and one 2.5-inch drive. The length of supported graphics cards should not exceed 185 mm, while the height of supported CPU coolers should not exceed 80 mm.


The most striking thing is that this chassis model is compatible with the majority power supply …

A new graphics card of an average efficiency has appeared in the arsenal of HIS manufacturers. Codenamed HIS 7770 iCooler (H777FN1G), the card is targeted those gamers who would like to receive a dual effect: the possibility to play all up-dated games and to satisfy all other graphics requirements for a reasonable price.



Model 7770 iCooler is based on AMD Cape Verde TX GPU, developed under 28 nm technological process and built on Graphics Core Next micro-architecture. It involves ten computing blocks and 640 current processors. The processing unit is expected to operate at the reference 1000 MHz clock frequency. The integrated GPU is accompanied by 1GB of GDDR5 memory which employs 128 bus; its nominal clock frequency starts at 1125MHz, while its effective frequency might achieve the margin of 4500MHz.


HIS 7770 iCooler employs PCI Express 3.0 x16 internal interface. A set of external video interfaces consists of HDMI, D-Sub and Dual-DVI ports that are able to ensure the …

First seen at CES 2013 exhibition, Asus ROG RAIDR solid-state drives are on their final stage of development before an official release in May. Unlike the majority of contemporary SSD solutions in the market, the product from Asus features quite distinct form-factor, similar to expansion cards. The new drive is known to employ PCI Express 2.0 x2 interface with the support of x16/x8/x4 slots.



According to the preliminary data, ROG RAIDR solid-state drives will be available in two capacity variations – 120 GB and 240 GB. Both models will run under a couple of SandForce SF2281 controllers, comprised into RAID 0 array. MLC NAND flash-memory chips from Toshiba (designed under 19 nm technological process) will be the heart of revolutionary SSDs. Irrespective of the overall differentiation, ROG RAIDR will support a range of technologies traditional SSDs support, including S.M.A.R.T., TRIM and NCQ.


With the respect to the performance, both drives will be able to demonstrate …