Memory cards of SDXC (Secure Digital Extended Capacity) standard are a new solution in the market. Lexar took challenge to become a pioneer in the integration of this standard into their products and announced the released of a new Professional 400x SDCX UHS-I model. This memory card belongs to the high-speed products. It is called to satisfy the needs of professional photographers and just enthusiasts, longing to receive the highest Full HD video or photo shots.



According to the preliminary specifications, memory cards Professional 400x SDCX UHS-I correspond to SD 3.0 standards and are designed under UHS-I technology. They will be delivered in 256 GB volume capacities. The claimed maximal data reading speed approximates 60 Mb/sec.


Professional 400x SDCX UHS-I is based of NAND chips manufactured under 20 nm technological process by Micron; their capacities equal to 128 Gbit. The development of these memory cards involved only progressive tools, such as the creation of …

First displayed at CeBIT 2013, MSI Z77A-GD65 Gaming motherboard is now showing out in the company’s product line. As suggested by the name and attention-getting design, the board has been elaborated specifically for gaming needs. The new-comer is based on Z77 chipset, features ATX form-factor, and supports Intel LGA1155-compatible processors of the second and third generation (Sandy Bridge/Ivy Bridge).



Among the most attractive facilities ascribed to the model, it’s possible to distinguish the incorporation of Qualcomm Atheros Killer E2200 network platform. This platform provides for a substantial improvement of network connection quality, by means of defining all gaming traffic and assigning it a major priority.


The motherboard is known to employ high-quality Military Class III components, including CopperMOS elements in copper cases, gold-plate throttles with Golden SSC ferrite mandrel, tantalum Hi-c CAP capacitors, as well as solid-state capacitors with …

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …