The inventory of graphics solutions developed by HIS has been replenished with a new original in design card based on Radeon HD 7850 adapter. Entitled HIS Radeon HD 7850 iPower IceQ, the card is stuffed with a three-slot IceQ cooler and substantial memory volume that equals to 4GB. In addition, this model supports iTurbo applet that promotes for the GPU and memory clock frequencies increase.



Graphics card from HIS is based on a two-layer copper printed circuit board. The latter houses soldered DrMOS elements instead of conventional transistors. The integrated GPU is furnished with 1024 current processors. Its nominal clock frequency equals to 860MHz but can be dynamically boosted due to iTurbo technology. In its turn, iPower technology ensures stability and more voltage index for efficient overclocking process.


Memory subsystem is introduced by GDDR5 modules with 265-bit interface. The nominal memory clock frequency approximates 4800MHz. Power supply subsystem consists of …

Abee, a company that earned popularity thanks to its high-end and unusual in design PC cases, is going to launch a pair of new top chassis, codenamed ACubic CP330 and Acubic CP730. Both models are distinguished by small-sized dimensions and by a truly high price. In this respect, Abee is going to beat Lian Li that is known for its rather costly casing solutions.



The developer houses its two new products in aluminum cases that are peculiar for their original design, with the combination of black and silver tints on the frontal panel to somehow resemble a chessboard. As it was mentioned above, pricewise, the models are an expensive solution targeting customers with specific requirements. Thus, ACubic CP330 cost approximately $330, while its companion, ACubic CP730, rises up to $365.


Abee ACubic CP330 features 229x249x229 mm dimensions and is intended to accommodate motherboards of mini-ITX form-factor. Its interface panel consists of two standard 3.5 mm audio slots and a …

The company Zalman continues to utilize the design of the whole successful chassis Z9, releasing a new model Z9 Plus D4-U3. Perhaps, the only difference from the recent Z9 U3 is the lower part of the front panel, made in the form of letter D.



The list of applied characteristics has remained the same. The body is made of steel and plastic in the form factor Mid-Tower. Its dimensions are 504 (L) x 207 (W) x 464 (H) mm, weight — a little over 7 lbs. Inside can be placed the motherboard ATX or microATX, seven cards PCI-E expansion up to 290 mm, ATX-compatible power supply, three optical drives, and seven hard drives, including two SSD 2.5 format.


The set includes two 120-mm fan — in front with the LED-backlit display and on the back without it. On the input-output is a small information display, two USB 3.0 ports and USB 2.0, Mini-Jack connectors for headphones and microphone.


Zalman Z9 Plus D4-U3 will debut in Japan and perhaps in some other markets, August 19 at a …