Much rumored reference graphics adapter from AMD has been recently officially introduced. As it was suggested before, Radeon HD 7990, codenamed ‘Malta’, employs two Tahiti XT2 GPUs, each of which contains 128 TMUs, 32 rasterization blocks (ROPs), and 2048 current processors (GCN architecture). Smooth work of both graphics cores is synchronized by means of PLX PEX8747 controller that supports 48 lines of PCI Express 3.0. Nominal clock frequencies ascribed to GPUs operation equal to 950 MHz, but Turbo mode enables the increase of frequencies up to 1000 MHz.



Video memory is represented by GDDR5 memory modules, the overall capacity of which equals to 6 GB (3 GB per each graphics core). Memory modules utilize 384-bit bus and run at 6000 MHz frequency with bandwidth of 288 Gb/sec per core. The incorporated PCB accommodates a single CrossFireX socket for the creation of various graphics configurations, including Quad-CrossFireX. Video interface panel boasts the availability of …

Cooler Master announces a release of two new PC cases of mid-tower form-factor. Codenamed N300 and N500, the couple belongs to the medium price tier products and is differentiated by a laconic design combined with a thoughtfully elaborated cooling. Each model features a totally black coating and grid-like frontal panel. In retail market these cases will be offered in two framework variations: with blind side panels and with a large transparent window on one of the panels.



Both models are thought to support motherboards of standard ATX and micro-ATX dimensional type. The most notable peculiarity is the cooling system that primarily consists of two pre-installed 120 mm fans (in the frontal and rear parts of the case); however, this pair might be easily supplemented by seven (with blind construction) or five (with windowed construction) fans more. Moreover, there is a feasibility of incorporating a liquid-cooling system. Some key specifications of both novices are featured below.
…

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.



The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …