NEC has replenished its product line with a new 24-inch monitor that joins MultiSync series. Codenamed MD242C2, the model is housed in a case of a rather strict design, featuring 556.8x227.6x378-528 mm dimensions. Upon the whole, this monitor positions itself as the most appropriate solution for medical establishments, providing for an accurate imaging.



Monitor NEC MD242C2 is based on IPS array with LED backlit and 12 ms response time (8 ms in Gray-to-Gray mode). Its operational resolution equals to 1920x1200 pixels, while the display aspect ratio makes up 16:10. Viewing angles, both vertical and horizontal, equal to 178 degrees, brightness achieves 350 cd/m2 and static contrast is estimated as 1000:1. NEC employs 14-bit look-up tables (LUT) to ensure proper color output and more accurate display of gray hues in blackened areas.


To continue, the manufacturer equips this model with mini D-Sub, HDMI, DVI-D, and DisplayPort video outputs. The two latter ports are known to …

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

Demands of customers towards the performance of SSDs become tougher each day. In this respect, the necessity to produce truly qualitative products goes to the limelight. Kingmax marches in step with the prevailing tendencies and releases high-performance SSD series, codenamed Client Pro. The series is represented by two models, SMU32 and SMU35, which go in 60GB, 120GB, 240GB, and 480GB volume capacities. These SSD models boast SATA III interface and high-speed synchronous flash-memory which are called to promote for the outstanding Write and Read speeds.



SSDs Kingmax SATA III Client Pro are based on high-end Sandforce controller that enables the boost of performance, reliability and data security facilities. The manufacturer employs the highest level of synchronous memory with the purpose to ensure the products' durability and retention of speeds in the course of time. If compared with the SSDs based on asynchronous memory type, Client Pro series is able to demonstrate more …