Chassis of Full-Tower form-factor usually have solid framework due to the layout scheme and the necessity to enclose a lot of components. Developers from Lian Li company have totally demolished the current tendencies and announced the release of their PC-V750 Full-Tower model with the front-end PSU localization. This allowed the designers to dramatically decrement the size of the chassis without sacrificing its capacity and general specifications. The compact size of the chassis is considered to be a kind of ‘revolution’ in the market, since it is compatible not only with ATX and microATX motherboards, but also with Extended-ATX boards.



Lian Li PC-V750 casing is made of aluminum and approximates 7.35 kg in weight. Its dimensions provide for the installation of massive CPU-coolers (up to 170 mm in height), up to ten expansion cards, including 380 mm 3D cards. The chassis is equipped with five fans of 120 mm each: the two fans are located on the front plate, the other two – …

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.



Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

Adata has lately announced the launch of a new SSD series codenamed SP600. The drive will supplement the company's line of budgetary solutions but will feature high-end specifications. SP600 is going to have SATA III interface with the throughput capacity of 6 Gb/sec. The series will house NAND MLC flash-memory chips and JMicron JMF661 controller.




This way, Adata aims to attract customers who require outstanding performance but, at the same time, who cannot afford buying too expensive drives. In addition, this model will suit those people who would like to transit their systems from traditional hard drives to more efficient SSD solutions.


Adata SP600 will be delivered in three volume capacities, — 32GB, 64GB, and 128GB – which will be developed in 2.5-inch form-factor. All models provide for the reduction of OS loading time and the increase of overall system speed, if compared with standard HDD performance. These SSDs ensure the data transfer speed at levels of 360 …